90 Fachbetrieb nach WHG von der TÜV NORD Systems GmbH & Co. KG betreut DIBt Berlin steel troughs guidelines TüV-Nord systems MVV TB Nr. C2.15.12 Approved for the storage of flammable liquids at the workplace as per DIN EN 14470-1 (type 90) and TRGS 510, annex 1. Allows hazardous substances to be stored where they are used: under the fume cupboard, workbench, etc. 131 Explanations see practical informations on page 6 and 84! ✔ ✔ ✔ ✔ SAFETY UNDERBENCH CABINETS Whole construction tested and approved by an authorized materials testing institute as per DIN EN 14470-1 (type 90) with a fire resistance > 90 minutes GS-approved safety (GS-sign) Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in • RAL 7035 - light grey Inner body made from HPL-coated sheets - RAL 7035 Automatic thermal closing mechanism if fire occurs • Door/s and drawer/s after temperature increase to ≤50°C and • Inlet and outlet channels after temperature increase to 70°C (±10°C) DN 80 ventilation connection for exhaust air extraction in the back wall Operation complies with TRGS 510 (approved even without exhaust air connection!) Ground connection in accordance with TRBS 2153 (avoidance of sources of ignition) Markings according to DIN EN 14470-1 / TRGS 510 / ISO 3864 / ASR A1.3 Door/s / drawer/s* with cylinder lock Inner width with pulled-out drawer approx. 320 mm door hold-open device (only FT) With inner fittings: AUS Type 90 / 880 FT, Article no. B80-2864-A AUS Type 90 / 880 SF, Article no. B80-2865-A AUS Type 90 / 880 FT below a fume hood ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ AUS TYPE 90 / 880 AS PER DIN EN 14470-1 (TYPE 90) AUS Type 90 / 880 SF SF, Article no. B80-2916-G * max. load 30 kg with uniformly distributed load All models Base sump tray (sump capacity type FT 1 x 18 liter, type SF 1 x 18 liter, type FT SF 2 x 11 liter, type SF SF 2 x 11 liter) as per WHG - Ü-sign according to StawaR Perforated cover plate as 1st storing level ◆ ◆ Model AUS Type 90 / 880 FT AUS Type 90 / 880 SF AUS Type 90 / 880 FT SF AUS Type 90 / 880 SF SF External dimensions W x D x H (mm) 877 x 570 x 600 877 x 570 x 600 877 x 570 x 600 877 x 570 x 600 Internal dimensions W x D x H (mm) 785 x 432 x 514 785 x 432 x 514 374 / 374 x 432 x 514 374 / 374 x 432 x 514 Doors 2 - 1 - Drawers - 1 1 2 Weight (kg) 133 138 135 135 Outer body: RAL 7035 - light grey Material inner fittings Article no., door/s / drawer/s: RAL 7035 - light grey sheet steel B80-2864-A B80-2865-A B80-2914-A B80-2916-A Article no., door/s / drawer/s: RAL 7035 - light grey stainless steel V2A B80-2945-A B80-2946-A B80-2947-A B80-2948-A Article no., door/s / drawer/s: RAL 1007 - daffodil yellow sheet steel B80-2864-G B80-2865-G B80-2914-G B80-2916-G Article no., door/s / drawer/s: RAL 1007 - daffodil yellow stainless steel V2A B80-2945-G B80-2946-G B80-2947-G B80-2948-G Accessories Material Article no. Article no. Article no. Article no. Shelf sheet steel B80-2816-A - B80-2953-A - Shelf stainless steel V2A B80-2817-A - B80-2954-A - additional pull-out shelf sheet steel - B80-2949-A B80-2951-A B80-2951-A additional pull-out shelf stainless steel V2A - B80-2950-A B80-2952-A B80-2952-A Socle height 35 mm sheet steel B80-2866-A B80-2866-A B80-2866-A B80-2866-A Socle, perforated height 35 mm sheet steel B80-2867-A B80-2867-A B80-2867-A B80-2867-A Extraction fans please see page 136!
RkJQdWJsaXNoZXIy NzgwNTU=